Betty TL
The maximum
The Betty TL2 is your handheld floodlight. Simple battery swap, an extremely robust and shapely aluminum housing and maximum 5800 lumens make Betty the perfect flashlight.
 Betty TLBetty TL 2 | |
|---|---|
| Runtime 45 W / 5800 Lumens | 1 Hour |
| Runtime 34 W / 3900 Lumens | 1:20 Hour |
| Runtime 28 W / 3200 Lumens | 1:45 Hour |
| Runtime 22 W / 2650 Lumens | 2:10 Hours |
| Runtime 16 W / 2050 Lumens | 3 Hours |
| Runtime 12 W / 1550 Lumens | 4 Hours |
| Runtime 8 W / 1050 Lumens | 6 Hours |
| Runtime 3 W / 520 Lumens | 16 Hours |
| Runtime 2 W / 270 Lumens | 24 Hours |
| Runtime 0.3 W / 50 Lumens | 160 Hours |
| Gewicht | 425g |
| Ladezeit | 2 : 40h |
 Flashlight BatteryBatterytank 6.9 Ah | |
|---|---|
| Material | CNC-machined, Aluminium 6061-T6, Shot-peened, Hard-anodized |
| Akku 7.2V | 6.9Ah |
| Watt Stunden | 50Wh |
| Gewicht | 273g |
| Abmessungen (ØxL) | 39 x 148mm |
| Empfohlen für | Betty TL2, Betty TL, Wilma TL, Tesla TL |
| Schutzklasse | IP 67 (waterproofness ), IK 09 (impact strength) |
| Zellentyp | LG MJ1 18650 |
| Zentralkontakt | hard golden plated |
| PCB | Reversible cuttoff at short circuit, overvoltage, undervoltage |
 ChargerCharger One | |
|---|---|
| Material | PolyCarbonat, Aluminium 6061-T6 |
| Ladestrom | 0.1 - 2.5A |
| Entladestrom | 0.1 - 0.5A |
| Eingangsspannung | 100 - 240V (DC) |
| Ausgangsspannung | 12V= |
| Eingangsstrom | 2A |
| Frequenz | 50 - 60Hz |
| Display | 2 x 16 character display with blue backlight LED |
| Geeignete Akkus | Lupine Li-Ion Batteries - 7.2V |
| Anschlüsse | Polarity-protected input and output |
| Funktionen | Li-Ion Charge, Discharge, Discharge/Charge, Strorage |
| Akustisches Signal | 60dB |
| Stromzufuhr | From power supply or 12V cigarette cable |
| Sicherung | yes |
| Microprozessor gesteuert | 14-Bit RISC |
 LampheadBetty TL2 | |
|---|---|
| Leuchtstufen | 11 steps from 0.3W (30 Lumens) to 45W (5800 Lumens) + red Center LED |
| Spezialstufen | Flash, SOS, Red Center LED |
| Material | CNC-machined, Aluminium 6061-T6, Shot-peened, Hard-anodized |
| Gewicht | 152g |
| Abmessungen (ØxL) | 57 x 50mm |
| Schutzklasse | IP 67 (waterproofness) |
| Linse | 26° Optics ( Collimated Lens Technology) |
| Leuchtmittel | 6 x Cree XM-L3; 1x XP-G2 |
| LED-Platine | Copper: Directbonding Thermalpad / Copperboard |
| Farbtemperatur | 6000K (5% tolerance) |
| Microprozessor | 14-Bit RISC (4 x PLL) |
| PCS | Aluboard |
| Taktung Wandler | 50KHz |
| Prozessortakt | 32MHz |
| Leiterbahnstruktur | Fine Pitch smaller 0.2 mm |
| Temperaturmanagement | active |
| Umgebungstemperatur | -25°C to +55°C |
| LED Anzeige | 5 x RGB LED Osram |
| LED Hintergrundbeleuchtung | 2 x RGB LED Avago |
| Spannungsanzeige | by RGB LED |
| Akkuwarnung Lampenkopf | by backlight |
| Entnommene Kapazität | by RGB LED |
| Reservetank | depending on battery and type of use |
| Kerzenlicht Funktion | 0.3W |
| Lux | 320lx |